Flexcon dermaflex™
NWP 240 white h-566 90 PFW
DermaFLEX™ NWP 240 WHITE H-566 90 PFW
Features and Benefits
- 2.4 ounce 100% nonwoven white polyester fabric
- H-566 high-tack acrylic adhesive with high strength for extended wear
- EtO and Gamma Sterilization Compatible
- 90 lb. moisture stable polycoated layflat release liner ideal for sheet and roll-to-sheet converting
technical data
|
Values
|
Thickness (Mils[microns])
|
|---|---|
|
Film
|
18.0 (457) +/- 15 %
|
|
Adhesive
|
1.9-2.1 (48-53) +/- 0.1 (3)
|
|
Liner
|
6.9 (175) +/- 10 %
|
ADHESION properties
|
Ultimate Peel From
|
Average Oz/In
|
(N/m)
|
|---|---|---|
|
Acrylic
|
131
|
(1441)
|
|
Glass
|
117
|
(1287)
|
|
Polypropylene
|
96
|
(1056)
|
|
Stainless Steel
|
119
|
(1309)
|
Electrical properties
|
Property
|
Value
|
Test Method
|
|---|---|---|
|
Expected Shear
|
Room Temp (hours): Less than 1.0
|
ASTM D 3654 Method A, a. 1 hr. dwell, b. 1 sq. in. surface, c. 4 lb. load
|
|
Tack (gm/sq cm)
|
390
|
ASTM D 2979
|
|
Storage Stability
|
Two years stored at 70°F (21°C) and 50% relative humidity
|
Product ID # FLX043343
All of the descriptive information, the typical performance data, and recommendations for the use of FLEXcon products shall be used only as a guide and do not reflect the specification or specification range for any particular property of the product. Furnishing such information is merely an attempt to assist you after you have indicated your contemplated use and shall in no event constitute a warranty of any kind by FLEXcon. All purchasers of FLEXcon products shall be responsible for independently determining the suitability of the material for the purpose for which it is purchased. No distributor, salesman, or representative of FLEXcon is authorized to give any warranty, guarantee, or make any representation in addition or contrary to the above.
